1. The PVC roofing rolls is widely used is construction industry for waterproofing project.
 2. PVC roofing rolls have good roof leakage proof effect. 
 3. The PVC roofing roll is eco-friendly, non-toxic and odor-free.
 4. The PVC roofing roll is tough and tensile and very easy to use.
 5. The PVC roofing rolls meet ISO, CE, GOST standard.
SBS modified asphalt waterproofing membrane, the membrane has a very good temperature resistance, can be -25 to +100 degrees Celsius temperature
Within the scope of use, there is a high flexibility and fatigue resistance, as well as high elongation of 1500% and a strong ability to puncture resistant,
Tear resistance. Suitable for cold regions, as well as the deformation and vibration of large industrial and civil construction of waterproof engineering.
Performance characteristics: low temperature flexibility is good, to achieve -25 degree is not crack; heat resistant performance is high, 90 degrees Celsius does not flow. Good extension performance, use
Long life, simple construction, small pollution and so on. The product is suitable for the waterproof engineering of I and II, especially suitable for low temperature
Building waterproofing works in the area of cold regions and structural deformation.
Specification classification: according to the physical index is divided into: I (-20 degrees C), II (-25 degrees C) two categories;
According to gestational can is divided into: polyester, glass fibre reinforced two categories; according to the covering material can be divided into: PE film (film), sand, shale, sand and other four categories; width: 1000mm, 10m long and 15m two specifications; thickness: 3mm, 4mm, polyester felt roll 5mm; 3mm, 4mm glass fiber mat sheet; glass fiber reinforced polyester felt roofing 5mm
Scope of application: widely used in industrial and civil building roofing, basement, toilet and other waterproof works as well as Roof garden,
Road, bridge, tunnel, car park, swimming pool and other works of waterproof and moisture. The extension performance of the project proposed by the deformation is larger.
Excellent polyester tire products, other construction should choose the relative economic fiberglass products. Construction method
Construction method: before the construction should clear the basic level defects, water content is not more than 9%, brushing special base oil and fully dry
Re construction. The concrete engineering construction and detail structure should be in accordance with the waterproof design, acceptance criteria and construction specifications of the project.
- basic requirements of dry, smooth, clean, no dust, no debris, no oil, no moss spots, such as holes, holes, cracks should be used
The cement mortar is filled, the prominent part to chisel.
The to wind brushing primer.
- on the surface and the surface of membrane adhesive coated, and set aside to overlap edge brushing glue joint.
The paving material, and exhaust, compaction.
The of lapped seam paste.
3 matters needing attention
Storage and transportation:
1 avoid sunlight and rain, dry and ventilated storage environment. The storage temperature shall not be lower than the corresponding product specifications (test temperature flexibility
C), should not be higher than 50. Vertical storage, height of not more than two layers;
2 transportation must stand, no more than two layers, to prevent inclined or horizontal pressure, when necessary with tarpaulin.
3 normal storage and transport conditions, storage period from the date of production for a year.
Four
According to the different matrix material, divided into polyester felt and glass fiber felt tire tire and glass fiber reinforced polyester felt tire.
The physical and mechanical properties of the coiled material are divided into type I and type ii.
According to the surface segregation material is divided into polyethylene film (PE), fine sand (S) and mineral grain (slice) material (M) three kinds.
 
Specifications
Coil nominal width of 1000 mm.
Polyester sheet nominal thickness of 3 mm, 4 mm, 5 mm.
The nominal thickness of glass fibre reinforced membrane of 3 mm, 4 mm.
Glass fiber reinforced polyester felt coil nominal thickness of 5 mm.
Each roll membrane area of 7.5 square meters, 10 square meters, 15 square meters.
Please just tell me your requirement, we can quote and provide free sample.